Item No.YMHD010
Price: $ 78.63List Price:$102.21

Wholesale price:

QTY 1-55-30>30
Unit Price$78.63$65.52$60.48

Product DatailsSpecifications
Product Features:

Supports 1 HDMI HD input, 1 way HDMI HD output.

Synchronously isolated HDMI audio signal, supports 1 SPIDF.

Optical fiber digital audio output, while decoding into 6 channel RCA analog audio and 1 headphone output.

HDMI high resolution support to 1080P/60, support 3D (24/30fs) HDMI CEC function support, support HDCP protocol supports three kinds of audio EDID read mode, between the external EDID (TV) and a built-in EDID 2CH/5.1CH switch is used to select stereo or 5.1CH audio output by 24 bit/96KHz audio DSP, 24bit / 192Khz audio DAC conversion chip support Dolby Digital AC3, DTS, lpcm, digital audio format decoding, automatic identification input audio formats stereo headphone amplifier output, can directly drive the 3.5mm plug universal headphone, high-quality sound, low noise to DC5V/1A external power adapter power supply.

Toggle switch: audio output mode EDID / mode selection switch.

HDMI PASS: direct mode. The audio output format is determined by the EDID TV information read from the HDMI output.

At this point HDMI output of the highest support LPCM 7.1 channel.

2CH: 2 channel mode. Select the built-in audio EDID for the 2 channel LPCM. At this point HDMI/SPDIF/RCA and headphones are output stereo audio.

5.1CH: 5.1 channel mode. Select the built-in audio EDID for source output. At this point HDMI/SPDIF and RCA can output 5.1 channel audio, headphone output of FL and FR two sound.

Connect and operation: connect the HDMI DVD/BD HD output to the HDMI input of the decoder via the HDMI line. Connect the HDMI output of the decoder via the HDMI line to the TV / monitor HDMI input. When digital audio is needed, the OPTICAL output from the decoder is connected to the fiber input of the amplifier via a fiber line.. 

When you need to simulate the audio, through the RCA audio line will be 6 audio channel analog audio analog audio input to the audio input, note that the audio channel one one. 

When you connect the TV or stereo amplifier, simply pick up the FL/FR two channels and switch the EDID mode to the 2CH mode. 

When using the headset output, select the EDID mode switch to the 2CH mode. Finally, the power adapter DC head received the decoder DC input, and then plug the adapter plug into the power outlet.

Customers Who Viewed This Item Also Viewed

Share your reviews, photos and videos here!


Fed 26,2015 11:02:04

Very fast delivery 2 weeks! Thank you! The prouct works well.

Is this feedback helpful for you?Yes ( 0 )No ( 2 )

See all 16 customer reviews
Payment & Shipping