2. digital audio from the audio decoder, the SPDIF/Toslink output port through the optical fiber line is connected to the power amplifier. 3. analog audio from the audio decoder, the L/R output port through the audio line connected to the power amplifier or tv. 4. the use of Headset, can be Headset (3.5mm connector) into the audio decoder HP output port.
Two ways of (S/PDIF) Toslink signals switch to one sets of (S/PDIF) TosLink signal receiving device. Audio format support : LPCM2.0/DTS/Dolby-AC3 The highest support 192 KHz sampling rate. Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 30m.